RV10-20C-0-N-23/ RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV10-20C-0-N-23/ (5610202) is a screw-in, cartridge-style, direct-acting poppet hydraulic relief valve designed to serve as a pressure-limiting device for hydraulic circuit protection. It is suitable for use with mineral-based or synthetic hydraulic fluids that possess lubricating properties. The valve operates by blocking flow from port 1 to port 2 until the pressure at port 1 is sufficient to unseat the poppet, allowing flow through the valve. This model offers a rapid response to load changes in hydraulic circuits and maintains low internal leakage. The RV10-20C-0-N-23/ has a pressure rating of 228 bar (3300 psi) and can withstand proof pressures up to 517.1 bar (7500 psi) and burst pressures of 1037.7 bar (15000 psi). It features a relief pressure range from 6.9 to 206.8 bar (100 to 3000 psi), with a maximum flow rating of 38 lpm (10 gpm) at maximum pressure and internal leakage limited to five drops per minute at 85% of the nominal setting. Temperature ratings vary depending on seal material: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. The valve is protected against corrosion through type III clear zinc plating per ASTM B633 standards. Installation specifications include compatibility with VC10-2 cavities and require an installation torque between 33.9 and 36.7 N-m, while the maximum allowable torque is set at 67.7 N-m. Seal kits are available under SK10-2X-B or SK10-2X-M options, providing versatility in maintenance and replacement tasks within various applications requiring reliable hydraulic circuit protection.