RV10-20B-6T-N-06/ RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5610140 (Material Number 5610140) is a screw-in, cartridge-style, direct-acting, poppet-type hydraulic relief valve designed to function as a pressure-limiting device for common hydraulic circuit protection. This valve is suitable for use with mineral-based or synthetic hydraulic fluids that have lubricating properties. The RV10-20X model effectively blocks flow from port 1 to port 2 until the pressure at port 1 reaches a level sufficient to unseat the poppet, allowing flow through the valve. It is known for its rapid response to load changes in typical hydraulic circuits and features low internal leakage, making it an efficient choice for various applications. The RV10-20X is not recommended for crossover applications; instead, the corrosion-resistant GRV10-20 should be considered if such characteristics are required. While this model can be used in both existing and new applications, Hydraforce suggests considering the RVD58-20 as a best-in-class alternative due to its comparable pressure and flow ratings, smaller size, better pressure rise characteristics, and competitive cost. However, it's important to note that the RVD58-20 is not a drop-in replacement but offers similar response rates and does not require dynamic seals. Assistance from Hydraforce is available to evaluate specific application needs if necessary.