RV10-20B-0-NC-33/ RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5610104 (5610104) is a screw-in, cartridge-style, direct-acting, poppet-type hydraulic relief valve designed to serve as a pressure-limiting device for common hydraulic circuit protection. It is specifically engineered for use with mineral-based or synthetic hydraulic fluids that possess lubricating properties. The RV10-20X model operates by blocking flow from port 1 to port 2 until the pressure at port 1 reaches a level sufficient to displace the poppet from its seat. This design facilitates a rapid response to load changes in typical hydraulic circuits while maintaining low internal leakage. It is important to note that although this valve can be used in existing and new applications, Hydraforce suggests considering the RVD58-20 as a superior alternative due to its enhanced performance characteristics. The RVD58-20 offers comparable pressure and flow ratings, better pressure rise characteristics, and a similar response rate in a smaller package without dynamic seals. However, it is not a direct drop-in replacement, and assistance may be required for application evaluation. Additionally, the corrosion-resistant version GRV10-20 is not recommended for crossover applications.