RV10-20A-0-V-33/ RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV10-20A-0-V-33/ (5610009) is a screw-in, cartridge-style, direct-acting poppet type hydraulic relief valve designed for use as a pressure-limiting device in common hydraulic circuit protection. It is suitable for use with mineral-based or synthetic hydraulic fluids that have lubricating properties. This relief valve operates by blocking flow from port 1 to port 2 until the pressure at port 1 is sufficient to unseat the poppet. It provides rapid response to load changes while maintaining low internal leakage, making it ideal for typical hydraulic circuits. The RV10-20X model has a pressure rating of 228 bar (3300 psi) and can handle proof pressures up to 517.1 bar (7500 psi) and burst pressures up to 1037.7 bar (15000 psi). The valve has a flow rating of 38 lpm (10 gpm) at maximum pressure and features minimal internal leakage of just 5 drops per minute at 85% of its nominal setting. This versatile valve can operate over a wide temperature range when equipped with different seal types: -40 to 100 \u00b0C (-40 to 212 \u00b0F) with Buna-N seals, -26 to 204 \u00b0C (-15 to 400 \u00b0F) with fluorocarbon seals, and -54 to 107 \u00b0C (-65 to 225 \u00b0F) with polyurethane seals. Additionally, it offers corrosion protection through type III clear zinc plating per ASTM B633 standards. The RV10-20X is compatible with fluid viscosities ranging from 7.4 to 420 cSt and maintains an optimal operating contamination level of ISO cleanliness code 18/16/13 per ISO4406 standards. Installation requires a VC10-2 cavity with cartridge installation torque between 33.9 and 36.7 N-m (25 to 27 ft-lb), ensuring secure placement without orientation restrictions.