RV10-20A-0-N-23/ RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV10-20A-0-N-23/ (Material Number: 5610002) is a screw-in, cartridge-style, direct acting, poppet-type hydraulic relief valve designed for pressure limiting in hydraulic circuits. It is suitable for use with mineral-based or synthetic hydraulic fluids that have lubricating properties. The valve operates by blocking flow from port 1 to port 2 until the pressure at port 1 is sufficient to unseat the poppet, allowing flow through the valve. This design ensures a rapid response to load changes while maintaining low internal leakage, making it suitable for applications requiring precise pressure control. With a pressure rating of 228 bar (3300 psi) and a proof pressure of 517.1 bar (7500 psi), this relief valve offers robust performance under demanding conditions. It has a burst pressure of 1037.7 bar (15000 psi), ensuring durability and reliability in high-pressure environments. The RV10-20A-0-N-23/ supports a relief pressure range from 6.9 to 206.8 bar (100 to 3000 psi) and can handle flow rates up to 38 lpm (10 gpm) at maximum pressure. The valve's temperature ratings vary depending on the seal material used: -40 to 100 \u00b0C (-40 to 212 \u00b0F) with Buna N seals, -26 to 204 \u00b0C (-15 to 400 \u00b0F) with fluorocarbon seals, and -54 to 107 \u00b0C (-65 to 225 \u00b0F) with polyurethane seals. It features type III clear zinc plating for corrosion protection per ASTM B633 standards. The RV10-20A-0-N-23/ fits into VC10-2 cavities and requires an installation torque of between 33.9 and 36.7 N-m (25 to 27 ft-lb). It has no orientation restrictions during installation, providing flexibility in various applications where space or position might be constrained.