PS08-30B-6T-N-24/ SEQUENCE VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PS08-30B-6T-N-24/ (5607144) is a direct-acting, spool-type hydraulic sequence valve designed to manage the flow of oil to a secondary circuit after a predetermined pressure is reached in the primary circuit. This model effectively blocks flow at port 1 while allowing it from port 2 to port 3 until the set pressure at port 1 is achieved, prompting the valve to open from port 1 to port 2. Notable features include adjustments that prevent backing out and prohibit springs from going solid, with optional spring ranges up to 165.5 bar (2400 psi). The valve is made with hardened spool and cage components for enhanced durability and longevity. It fits compactly into industry-common sizes and operates under pressure ratings up to 241.3 bar (3500 psi) at all ports, with proof and burst pressures reaching up to 482.6 bar (7000 psi) and 896.3 bar (13000 psi), respectively. The PS08-30B has a flow rating of 22.7 lpm (6 gpm) and a maximum internal leakage of 82 ml/min (5 in\u00b3/min) under nominal settings. It supports operating fluid temperatures ranging from -40\u00b0C to 100\u00b0C (-40\u00b0F to 212\u00b0F) with buna N seals, -26\u00b0C to 204\u00b0C (-15\u00b0F to 400\u00b0F) with viton seals, and -54\u00b0C to 107\u00b0C (-65\u00b0F to 225\u00b0F) with polyurethane seals. The storage and ambient temperature range for this valve is between -40\u00b0C and 70\u00b0C (-40\u00b0F and 160\u00b0F). Compatible fluids include mineral-based or synthetic types with lubricating properties, within a viscosity range of 7.4 to 420 cSt, adhering to a maximum operating contamination level of ISO code 18/16/13 per ISO standard ISO4406. Installation specifications suggest using VC08-3 cavities with cartridge installation torque between 25.8 N-m and 28.6 N-m (19 ft-lb to 21 ft-lb), without any orientation restrictions during installation. The unit weighs approximately .26 kg (.58 lb), featuring an internal wetted surface area of about .128 cm\u00b2 (.199 in\u00b2). Seal kits like SK08-3X-BB are available for maintenance or replacement needs, ensuring optimal performance over time.