PR08-32A-0-N-22/ REDUCING VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PR08-32A-0-N-22 (Material Number 5606003) is a screw-in, cartridge-style, direct-acting spool type hydraulic pressure reducing/relieving valve. It features an internal pilot and spring chamber drain, specifically designed for pressure regulation in secondary circuits with stable input flow. In its normal state, the valve allows bidirectional flow from port 2 to port 1 while maintaining a constant drain at port 3. Upon reaching a set pressure at port 1, the valve shifts to block flow at port 2, thereby regulating the pressure at port 1. Additionally, it can relieve excess pressure from port 1 to port 3 over the set reducing pressure. Notable features include non-backable adjustments that prevent springs from solidifying and optional spring ranges up to 152 bar (2200 psi). The valve is built with hardened spool and cage components for durability and comes in a compact size common in the industry. The PR08-32A-0-N-22 operates with a maximum pressure rating of up to 241.3 bar (3500 psi) for ports 1 and 2, while port 3 has a rating of up to 103.4 bar (1500 psi). It can withstand proof pressures of up to 517.1 bar (7500 psi) and burst pressures up to 896.3 bar (13000 psi). The unit supports flow rates up to 11.4 lpm (3 gpm) with minimal internal leakage under specified conditions. Temperature tolerance ranges from -40\u00b0C to +100\u00b0C with Buna N seals, extending further with other seal options. This product is protected against corrosion through clear zinc plating per ASTM standards and is compatible with mineral-based or synthetic fluids possessing lubricating properties within a viscosity range of 7.4 to 420 cSt. The installation specifications suggest cavity VC08-3 with specific torque requirements for cartridge installation and plug torque settings. Optional seal kits are available for maintenance needs.