RV08-20L-0-N-18/ RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5600802 (5600802) is a screw-in, cartridge-style, direct-acting, poppet-type hydraulic relief valve designed for lower flow circuits that require minimal internal leakage. The RV08-20X model effectively blocks flow from port 1 to port 2 until the pressure at port 1 is sufficient to overcome the spring-opposed poppet's seat. This valve offers various pressure adjustment options, including non-adjustable factory presets and adjustments with positive stops to prevent springs from going solid. It supports optional spring ranges up to 248 bar (3600 psi) and provides rapid response to pressure changes. A compact design enhances its applicability in space-constrained environments. The RV08-20X also offers an optional bi-directional pressure seal for applications requiring bi-directional pressure capabilities. While it is suitable for existing and new applications, it is noted that the RVD58-20 model can functionally replace this valve in most scenarios due to its comparable pressure and flow ratings, response rate, better pressure rise characteristics, smaller size, lack of dynamic seals, and competitive cost. Note that a VC08-2B cavity variation is required for installation, although some manifolds may allow for a drop-in replacement without modifications.