HSV10-22M-10HT-U-12EL SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5529030 (5529030) is a high-performance hydraulic cartridge valve, specifically designed as a 2-way, piloted, poppet-type, normally closed screw-in valve. This model is tailored for low leakage in load holding applications, ensuring efficient operation and reliability. The HSV1022X operates by blocking flow from ports 2 to 1 when de-energized, while allowing flow from ports 1 to 2 once the spring forces are overcome, as indicated in the performance graph. When energized, it facilitates bidirectional flow. A notable feature of this valve is its manual override operation. In its normal state (de-energized), the manual override pin should be seated in the lower detent groove. For manual shifting, the operator needs to push down on the knob and rotate it 180 degrees in either direction. This feature allows for increased flow when the knob is pulled on, although it's intended primarily for emergency use rather than continuous-duty operations. The HSV1022X boasts several robust features including a continuous-duty rated coil and a hardened seat which contribute to its long life and minimal leakage. It also offers optional coil voltages and terminations along with efficient wet-armature construction. The cartridges are voltage interchangeable and come with waterproof E-Coils rated up to IP69K standards. Additionally, this unit features a unitized, molded coil design and solenoid tubes and coils that are resistant to salt spray for up to 960 hours. All HyPerformance products including this model adhere strictly to NFPA specification T2.6.1 with a verification level of 90% and an assurance level of 99%.