HSP10-47CB-0-U-0 SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce HSP10-47CB-0-U-0 (5503621) is a high-pressure, proportional, 4-port, 3-position, spool-type, screw-in cartridge hydraulic solenoid valve designed for robust and efficient operation in hydraulic systems. This valve offers versatile control with its ability to block all ports when de-energized and selectively allow flow between specific ports when either of its two coils (s1 or s2) is energized. The HSP10-47CB-0-U-0 accommodates varying work port flows which can be critical in applications involving different cylinder ratios. A key feature of this model is its manual override capability which provides emergency operational control of the valve. This feature allows manual shifting of the valve from neutral to activate specific coil functions through a simple push and rotate action on the manual override knob. The valve's construction includes industry-standard cavity dimensions and it utilizes continuous-duty rated coils along with efficient wet-armature construction ensuring reliable performance even under demanding conditions. Hydraforce's commitment to durability and performance is evident in the HSP10-47CB-0-U-0’s design which includes waterproof E-Coils rated up to IP69K, patented high-strength solenoid tubes that are 960-hour salt-spray rated, and compliance with NFPA specification T2.6.1. The valve’s robustness is further highlighted by its impressive pressure ratings including a maximum operating pressure up to 420 bar (6090 psi), proof pressure at 690 bar (10,000 psi), and burst pressure at 1380 bar (20,000 psi). This model's operational fluid temperature range can vary depending on the seal material used - from as low as -40°C up to +204°C with fluorocarbon seals, making it suitable for a wide range of environments and applications. Furthermore, it supports mineral-based or synthetic hydraulic fluids within a viscosity range of 7.4 to 420 cSt, ensuring flexible fluid management according to system requirements.