FR50-23A-0-N-/M1.0 FLOW REGULATOR

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce FR50-23A-0-N-/M10 (5424120.M10) is an adjustable, pressure compensated, restrictive type flow regulator cartridge valve with a reverse flow check. This valve is designed to maintain a consistent flow rate from port 2 regardless of pressure variations within the circuit when the inlet is at port 1. It features a screw-in design that allows for counterclockwise adjustment to increase the valve opening from fully closed to fully open. The FR50-23A-0-N-/M10 is equipped to handle pressures up to 350 bar (5075 psi), with a proof pressure of 690 bar (10000 psi) and a burst pressure of 1379 bar (20000 psi). It supports fluid temperatures ranging from -40°C to +100°C (-40°F to +212°F) with standard Buna N seals, and can handle higher temperature ranges with alternate seal materials. Flow capabilities of this valve range from 0.4 to 11.5 liters per minute (0.1 to 3.0 gallons per minute), ensuring versatility for various hydraulic applications. The maximum internal leakage is controlled at less than 30 ml/min at 5000 psi, highlighting its efficiency in fluid control. Additionally, the FR50-23A-0-N-/M10 can operate effectively within a wide viscosity range of hydraulic fluids from 7.4 to 420 cSt, accommodating both mineral-based and synthetic fluids with lubricating properties. This product is constructed using hardened parts for enhanced durability and longevity while providing a quiet and modulated response during operation. Its industry-common cavity design facilitates easy integration into various hydraulic systems without orientation restrictions during installation, making it an adaptable solution for regulated fluid control in complex setups.