EHPR98-G33S-0-G-12ER/Z
Manufacturer: Hydraforce
Material #: 5278667
Model : EHPR98-G33S-0-G-12ER/Z
Destination
$64.00 USD
Availability: Backordered
Ships from US
Qty:
Delivered as early as October 27, 2026
| Ratings: | Pressure Ratings Pressure rating: 103 bar (1500 psi) Port 2 45 bar (650 psi) Port 1 34.5 bar (500 psi) Port 3 Proof pressure: 54 bar (780 psi) Port 3 345 bar (5000 psi) Ports 1, 2 Burst pressure: 258 bar (3750 psi) All ports pressurized Control pressure at maximum control current: 30 bar (435 psi) Flow Ratings Flow rating: 3.8 lpm (1.0 gpm) Maximum internal leakage: 30 ml/min (1.8 in³/min) At 34.5 bar (500 psi) Hysteresis: 4 % PWM Other Ratings Cycle life: 10 million cycles Environmental rating: IP69K Corrosion protection: 960 hour salt spray per ASTM B117 Temperature Ratings Operating fluid temperature: -40 to 149 °C (-40 to 300 °F) HNBR -26 to 204 °C (-15 to 400 °F) Fluorocarbon -54 to 107 °C (-65 to 225 °F) Polyurethane Storage temperature: -40 to 70 °C (-40 to 158 °F) Ambient temperature: -40 to 80 °C (-40 to 176 °F) |
| Operating Parameters: | Fluids:
Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt |
| Electrical Parameters: | Maximum control current:
1.130 A Coil 10 V 0.940 A Coil 12 V 0.780 A Coil 14 V 0.565 A Coil 20 V 0.470 A Coil 24 V 0.390 A Coil 28 V Coil resistance: 4.83 ohm Coil 10 V 7.28 ohm Coil 12 V 10.05 ohm Coil 14 V 18.35 ohm Coil 20 V 29.54 ohm Coil 24 V 40.36 ohm Coil 28 V Valve inductance: 68 mH 10 V coil 104 mH 12 V coil 152 mH 14 V coil 284 mH 20 V coil 433 mH 24 V coil 645 mH 28 V coil |
| Performance: |      |
| Installation Specifications: | Cavity:
VC-G027 Standard configuration Drop-in cavities Installation type: Flange mounted Orientation restriction: None Mounting screw torque: 3 to 4 N-m (2.2 to 3.0 ft-lb) For standard VC-G027 Cavity 1.2 to 1.5 N-m (0.9 to 1.1 ft-lb) For retrofit VC-T009 Cavity Note: For retro-fitting into older drop-in cavities and other mounting options, see "Mounting-options-for-G3-valves" technical reference Mounting options for G3 Valves |
| Order Code: | NOTE: *The fast responding plunger is typically used in pilot applications with increased volume at the control port. Minimum volume at the control port may cause the valve to become unstable. consult factory for application assistance when selecting this option. POSITION CODE DESCRIPTION EHPR98-G33DG-H-J-KL-U D Plunger Option D BLANK Standard D F Fast responding G Screen G BLANK NONE G S 100 Mesh Screen H Line Body H 0 No Body J Seal J G HNBR (Hydrogenated Nitrile Butadiene Rubber) J V Fluorocarbon J P Polyurethane K Coil Voltage K 10 10 VDC K 12 12 VDC K 14 14 VDC K 20 20 VDC K 24 24 VDC K 28 28 VDC L Coil Termination L EJ E-Coil, AMP Jr. L ER E-Coil, Deutsch L EY2A E-Coil, Metri-Pack 150.2 U Mounting Plate U BLANK None U G Standard Single Valve Plate U T Retro-Fit Plate |
