PD10-41-6T-NS-110 PILOTED 3-WAY

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PD10-41-6T-NS-110 (5261148) is a robust, screw-in, cartridge-style, pilot-operated, spool-type hydraulic directional valve designed for precise fluid control in various hydraulic systems. In its neutral position, this valve enables flow from port 3 to port 4 while blocking port 2. Upon receiving a remote pilot signal at port 1, the valve transitions to allow flow from port 3 to port 2 and simultaneously blocks flow to port 4. Notably, the pressure at port 4 influences the pilot pressure required due to its direct connection with the spring chamber; this pressure must be considered alongside the bias spring value for accurate operation. This model is built for durability with a hardened spool and cage ensuring extended operational life under rigorous conditions. It is compatible with industry-standard cavity VC104 and can be utilized in systems requiring up to a maximum of 241 bar (3500 psi) pressure. The valve exhibits maximum internal leakage of 82 ml/min at pressures up to 207 bar (3000 psi), ensuring efficient performance. Temperature tolerance ranges from -40°C to +100°C with Buna N seals and can extend up to +204°C with fluorocarbon seals or +107°C with polyurethane seals, accommodating various operating environments. The PD10-41-6T-NS-110 supports mineral-based or synthetic hydraulic fluids within a viscosity range of 7.4 to 420 cSt and maintains performance even in contamination levels up to ISO 4406:2018/14. Weighing approximately between 0.19 kg and 0.27 kg depending on specific configurations (PD1041-41N or PD1041T41NT respectively), it offers flexibility in installation without orientation restrictions and requires a cartridge installation torque between approximately 32.5 to 35.3 Nm (24 to 26 ft-lb). This valve is an essential component for systems requiring reliable directional control of hydraulic fluids under varying pressures and temperatures.