LS50-30-0-P SHUTTLE VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce LS50-30-0-P (5242000) is a load shuttle valve designed as a screw-in, cartridge-style hydraulic check valve. This model is particularly engineered for use in hydraulic systems where a priority of flow direction is critical, favoring higher pressure circuits over lower ones. It efficiently allows flow from either port 1 or port 3 to port 2, depending on which has the higher pressure, ensuring optimal operation in varied hydraulic applications. This valve features rapid response to changes in load direction and fits an industry-common cavity, making it versatile for integration into numerous systems. With a robust pressure rating of up to 345 bar (5000 psi) and a flow rate capacity of up to 30.3 liters per minute (8 gallons per minute), the LS50-30-0-P is built to handle demanding conditions. It also boasts minimal internal leakage at high pressures, with only 5 drops per minute at its maximum rated pressure. Temperature resilience is another key aspect of this valve, supporting operating fluid temperatures ranging from -26°C to +204°C (-15°F to +400°F) with fluorocarbon seals, and slightly lower ranges with polyurethane or urethane seals. This makes it suitable for various operating environments from cold to high heat applications. The LS50-30-0-P weighs approximately 0.09 kg (0.2 lbs) and has an internal wetted surface area of about 89 cm² (13.8 in²). Installation specifications include a VC103 cavity requirement and recommended torque settings for cartridge installation and maximum allowable torque, ensuring secure and proper fitting into hydraulic systems without orientation restrictions. Additionally, the Hydraforce LS50-30-0-P can be equipped with optional seal kits available in fluorocarbon, polyurethane, or urethane materials to match specific application needs and environmental conditions. These kits come with installation instructions to aid proper setup within the system’s configurations.