HS50-42-0-P HOT OIL SHUTTLE VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce HS50-42-0-P (5241302) is a high-performance hot oil shuttle valve designed for use in hydraulic systems. This screw-in, cartridge-style valve is a spool type, 2-position, 3-way valve that is closed in transition. It efficiently directs the flow of charge pump oil either to a heat exchanger or back to the tank, making it an essential component for hydrostatic transmissions. The operation of the HS50-42-0-P relies on internal piloting at ports 1, 2, or 4, which directs oil flow from the opposite port to port 3. This action facilitates the removal of oil from the low-pressure side for purposes such as cooling or filtration. This springless valve operates solely on internal pilot pressure signals to shift positions and ensures that flow paths are closed during transition. The HS50-42-0-P can handle pressures up to 245 bar (5000 psi) and operates effectively with mineral-based or synthetic hydraulic fluids with lubricating properties. It supports a wide range of operating fluid temperatures from -40°C to +100°C with Buna N seals and even higher with other seal types like fluorocarbon and polyurethane. The valve's design allows for maximum internal leakage of 115 ml/min at 207 bar (3000 psi), ensuring efficient operation and minimal loss of fluid. It fits within a VC104 cavity and can be installed using a torque range of 32.5 to 35.3 Nm (24 to 26 ft-lb). Optional accessories such as different seal kits are available to suit various environmental conditions and operational requirements, enhancing its versatility across multiple applications without orientation restrictions in installation.