5231240

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce DCV10-6T-N (5231240) is a double pilot operated hydraulic check valve, designed specifically for use in blocking or load holding circuits. This valve facilitates flow from the \"V\" ports to the \"C\" ports while typically preventing flow in the opposite direction. It allows reverse flow from \"C\" to \"V\" when pressure is applied to the alternate \"V\" port, utilizing a 4:1 pilot ratio. This means at least 25% of the load pressure held at either \"C\" port is required at the opposite \"V\" port to open the flow passage. The DCV10-6T-N features a hardened seat for durability and minimal leakage, with optional sealed pistons and cartridge thermal reliefs available on port \"C1\", \"C2\", or both. It offers low pressure drop and serviceability of the check section as a cartridge. The valve has a pressure rating of 241 bar (3500 psi) and optional thermal relief settings up to 348 \u00b138 bar (5050 \u00b1550 psi), with a thermal relief reseat minimum of 207 bar (3000 psi). Its operating fluid temperature ranges from -40 to 120 \u00b0C (-40 to 248 \u00b0F). The maximum internal leakage is limited to 0.25 ml/min (5 drops/min) from C to V at full pressure, ensuring efficient operation. Constructed with an anodized high strength aluminum alloy body and steel cartridges with hardened work surfaces, it also features zinc-plated exposed surfaces for enhanced durability. Weighing approximately 0.68 kg (1.50 lb), it supports optional seal kits including Buna and Viton options for varied application needs.