PC10-38-0-N-100/25 CONTROL VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PC10-38-0-N-100/25 (5226202) is a pilot-operated hydraulic check valve, designed primarily for blocking or load-holding applications within hydraulic systems. This model features a 3:1 pilot ratio and integrates a low flow thermal relief valve to safeguard against cylinder damage due to temperature-induced pressure intensification. Although the thermal relief feature is not suitable for dynamic pressure limiting, it allows a small amount of oil to pass from port 3 to port 2 if the pressure at port 3 exceeds the thermal relief setting, thereby preventing potential damage. Key specifications of the PC10-38-0-N-100/25 include a maximum operating pressure of 241 bar (3500 psi), with proof pressure reaching up to 390 bar (5700 psi). The valve's flow rating stands at 45 lpm (12 gpm), and it exhibits maximum internal leakage of only 0.25 ml/min at full operating pressure. It supports fluid temperatures ranging from -40°C to +100°C with standard seals, and can handle various hydraulic fluids including mineral-based or synthetic types with lubricating properties. This model is built with a hardened seat ensuring long life and minimal leakage, and offers an optional sealed piston. Designed for ease of installation in industry-standard cavities (VC10-3), the PC10-38-0-N-100/25 does not require specific orientation, allowing for flexible mounting options. It can be used with various seal kits such as SK103XTM depending on application requirements, ensuring adaptability across different operational conditions without compromising on performance or safety.