CV10-24-8T-V-05 CHECK VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce CV10-24-8T-V-05 (5214060V) is a screw-in, cartridge style hydraulic check valve, primarily utilized as a blocking or load-holding device. Its design facilitates flow from port 2 to port 1 while normally blocking the opposite direction. The valve features a fully guided check which remains spring-biased closed until sufficient pressure at port 2 compels it to open towards port 1. This model boasts a hardened seat ensuring prolonged life and minimal leakage, and offers optional bias springs to enhance backpressure application flexibility. Additionally, the low check mass is specifically designed to prevent cavitation. Rated for pressures up to 3500 psi (241 bar) and capable of handling flow rates up to 15 gallons per minute (56.8 lpm), this valve is suitable for various hydraulic applications. It operates efficiently within fluid temperatures ranging from -40°C to +100°C with standard Buna-N seals, and from -26°C to +204°C with fluorocarbon seals. The CV10-24-8T-V-05 can accommodate a wide range of fluid viscosities from 7.4 to 420 cSt and maintains performance integrity even in environments where contamination levels reach up to 20/18/14 per ISO 4406. Weighing just 0.09 kg (0.20 lb) with an internal wetted surface area of approximately 67.7 cm² (10.5 in²), its compact design does not restrict installation orientation, allowing for versatile application across various systems without spatial constraints. The valve's industry-standard cavity VC102 facilitates easy integration into existing setups, ensuring compatibility with typical size #10 two-way cavities without necessitating extensive modifications or specialized tools for installation—requiring torque settings between 32.5 to 35.3 Nm (24 to 26 ft-lb).