CV10-24S-0-N-05 CHECK VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce CV10-24S-0-N-05 (5214005) is a high-performance hydraulic check valve designed for industrial applications requiring reliable blocking or load-holding capabilities. This screw-in, cartridge-style valve facilitates flow from port 2 to port 1 while normally blocking flow in the opposite direction. It features a fully guided check which remains spring-biased closed until sufficient pressure at port 2 compels it to open towards port 1. Engineered for durability and efficiency, the valve incorporates a hardened seat that ensures long life and minimal leakage. Notably, the CV10-24S-0-N-05 offers optional bias springs which provide flexibility for backpressure applications and features a low check mass, reducing the risk of cavitation in dynamic fluid systems. The valve operates effectively within a pressure rating of up to 3500 psi (241 bar) and supports flow rates up to 15 gpm (56.8 lpm). It accommodates a wide range of operating temperatures, from -40 to +212°F (-40 to +100°C) with standard Buna N seals, and up to 400°F (204°C) with fluorocarbon seals. Additional technical specifications include an internal wetted surface area of approximately 10.5 inches (67.7 cm), and the unit weighs around 0.20 lb (0.09 kg). For installation flexibility, it has no orientation restrictions and fits into industry-standard VC102 cavities, requiring an installation torque between 24 to 26 ft-lb (32.5 to 35.3 Nm). The valve's design also supports various hydraulic fluids including mineral-based or synthetic types with lubricating properties across a viscosity range of 7.4 to 420 cSt. Overall, the Hydraforce CV10-24S-0-N-05 is engineered for robust performance in demanding hydraulic applications where fluid control and prevention of reverse flow are critical.