CV16-20-0-V-05 CHECK VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce CV16-20-0-V-05 (5203001) is a high-performance, screw-in cartridge style hydraulic check valve designed for blocking or load-holding applications. This valve facilitates flow from port 1 to port 2 and normally blocks oil flow in the opposite direction. It features a fully guided poppet that remains spring-biased closed until sufficient pressure at port 1 forces it open to port 2. The construction includes a hardened seat to ensure long life and minimal leakage. The valve is adaptable with optional bias springs, enhancing its flexibility for backpressure applications and is compatible with an industry-common cavity. Rated for pressures up to 3500 psi (241 bar) and capable of handling flow rates up to 40 gpm (151 lpm), the CV16-20-0-V-05 is robust in managing demanding hydraulic operations. It supports a variety of seals—Buna N, Viton, and Polyurethane—that can operate within fluid temperatures ranging from -40°C to +204°C (-40°F to +400°F), depending on the seal material. This adaptability makes it suitable for different environmental conditions and storage temperatures ranging from -40°C to +70°C (-40°F to +160°F). The valve is designed for use with mineral-based or synthetic hydraulic fluids with lubricating properties, accommodating fluid viscosities between 7.4 and 420 cSt. It maintains maximum operating contamination levels as per ISO 4406 standards at 20/18/14. Weighing approximately 0.28 kg (0.61 lb) in its standard form, it also offers versions with tall adaptors for different spring pressures, increasing its weight and internal wetted surface area accordingly. Installation specifications include a VC162 cavity type with no orientation restrictions and a cartridge installation torque range of 46 to 54 ft-lb (62.4 to 73.2 Nm). Accessories such as seal kits (SK162XT) and installation instructions are available, alongside compatible housings like the 162w valve bodies, ensuring comprehensive support for various setup requirements.