CV12-20-12T-N-60 CHECK VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce CV12-20-12T-N-60 (5202580) is a highly efficient screw-in, cartridge-style hydraulic check valve designed primarily for use as a blocking or load-holding device. This model facilitates the flow of fluid from port 1 to port 2 and generally blocks the flow in the reverse direction. The operation of the CV12-20-12T-N-60 is characterized by a fully guided check mechanism that remains spring-biased closed until sufficient pressure is applied at port 1 to enable opening towards port 2. Key features include a hardened seat that ensures long life and minimal leakage, enhancing the valve's reliability and performance efficiency. The optional bias springs offer flexibility for backpressure applications, allowing for customization according to specific operational requirements. The valve's design also includes a cost-effective cavity that contributes to its overall economic value. The CV12-20-12T-N-60 can handle pressures up to 240 bar (3500 psi), with maximum internal leakage maintained at a minimal level of 5 drops per minute at this maximum pressure. It supports various fluid temperatures ranging from -40°C to +100°C with Buna N seals, -26°C to +204°C with fluorocarbon seals, and -54°C to +107°C with polyurethane seals. Suitable for mineral-based or synthetic hydraulic fluids with lubricating properties, it accommodates fluid viscosities from 7.4 to 420 cSt and meets cleanliness standards up to ISO 4406:2018/14. Installation specifications include a VC122 cavity design compatible with 122-size two-way cavities and no orientation restrictions during installation. Torque settings range from an installation torque of 44.7 to 50.2 Nm and a maximum allowable torque of up to 101.7 Nm. Accessories such as seal kits (SK122XT) and housings for the valve are also available, ensuring comprehensive support for various application needs without compromising on quality or performance.