CV10-20-0-N-05 CHECK VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce CV10-20-0-N-05 (5201100) is a hydraulic check valve designed for use as a blocking or load-holding device in various hydraulic systems. This screw-in, cartridge-style valve facilitates flow from port 1 to port 2 while normally preventing flow in the reverse direction. It features a fully guided check assembly that remains spring-biased closed until sufficient pressure at port 1 compels it to open towards port 2. The valve boasts a hardened seat ensuring longevity and minimal leakage, and offers optional bias springs to enhance backpressure application flexibility, including a 300 psi bias spring option with a tall cap for specific needs. Rated for pressures up to 3500 psi with proof pressures reaching up to 5075 psi, the CV10-20-0-N-05 can handle significant hydraulic demands. It supports a flow rate of up to 20 gallons per minute and maintains maximum internal leakage at just two drops per minute at full pressure. The valve is compatible with mineral-based or synthetic hydraulic fluids within a viscosity range of 7.4 to 420 cSt and operates effectively within a broad temperature spectrum depending on the seal material used—ranging from -40°C up to +204°C. Designed for easy installation in industry-standard VC102 cavities, this valve does not require orientation-specific positioning, making it versatile for various installation contexts. It can be torqued between 24 to 26 ft-lb during installation, with maximum allowable torque capped at 50 ft-lb, ensuring secure and reliable setup. Accessories such as different seal kits tailored for various environmental conditions are also available, enhancing the valve’s adaptability and performance in diverse operational settings.