CV08-20-0-V-150 CHECK VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce CV08-20-0-V-150 (5200501) is a screw-in, cartridge style hydraulic check valve primarily designed for use as a blocking or load-holding device. This model facilitates hydraulic flow from port 1 to port 2, while typically preventing flow in the reverse direction. It features a fully guided check assembly that remains spring-biased closed until adequate pressure at port 1 compels it to open towards port 2. The valve boasts a hardened seat ensuring longevity and minimal leakage. The CV08-20-0-V-150 is notable for its compact size and rapid closing and seating capabilities, enhancing its functionality in various applications. It offers optional bias springs to accommodate varying backpressure applications, adding to its versatility. The unit operates effectively within a pressure rating of up to 241 bar (3500 psi), with proof pressure at 350 bar (5075 psi) and an impressive burst pressure of 1034 bar (15000 psi). Temperature adaptability ranges significantly depending on the seal material used— from -40°C to +100°C with Buna N seals, -26°C to +204°C with fluorocarbon seals, and -54°C to +107°C with urethane and polyurethane seals. This valve also handles a wide range of fluid viscosities from 7.4 to 420 cSt and supports mineral-based or synthetic hydraulic fluids with lubricating properties. Additional features include corrosion protection up to 960 hours as per ASTM B117 test standard for specific models like GCV0820 only. The CV08-20-0-V-150's design does not restrict installation orientation, making it flexible for various system configurations. Optional accessories such as different seal kits are available for customization according to application needs.