CV08-20-0-N-25 CHECK VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce CV08-20-0-N-25 (5200400) is a high-performance, screw-in, cartridge-style hydraulic check valve designed for use as a blocking or load-holding device. This valve facilitates flow from port 1 to port 2 while normally blocking flow in the opposite direction. It features a fully guided check assembly that is spring-biased closed and requires sufficient pressure at port 1 to open towards port 2. The valve is constructed with a hardened seat to ensure long life and minimal leakage and offers optional bias springs to enhance backpressure application flexibility. Compact in design, the CV08-20-0-N-25 ensures rapid closing and seating, making it highly effective in systems requiring reliable performance under varying pressure conditions. It supports a maximum operating pressure of 241 bar (3500 psi), with proof and burst pressures reaching up to 350 bar (5075 psi) and 1034 bar (15000 psi) respectively. The valve operates effectively within fluid temperatures ranging from -40°C to +100°C with standard Buna N seals, extending up to +204°C with fluorocarbon seals. This model accommodates a wide range of fluid viscosities from 7.4 to 420 cSt and maintains maximum internal leakage at a minimal rate of only 0.10 ml/min at full operating pressure, ensuring efficiency and reliability in hydraulic circuits. Installation specifications include a VC082 cavity requirement with no orientation restrictions, allowing for versatile application across various hydraulic setups. The CV08-20-0-N-25 also comes with various seal kit options including Buna N, fluorocarbon, polyurethane, and urethane options to suit different environmental conditions and applications.