TS90-G34BS-0-G-24ER
Manufacturer: Hydraforce
Material #: 5151021
Model : TS90-G34BS-0-G-24ER
Destination
$80.00 USD
Availability: Backordered
Ships from US Note: Sales tax, shipping, and applicable tariffs will be calculated at checkout.
Qty:
Delivered as early as February 11, 2027
| Ratings: | Pressure Ratings Pressure rating: 34.5 bar (500 psi) Proof pressure: 241 bar (3500 psi) Ports 2 and 3 54 bar (780 psi) Port 4 Burst pressure: 310 bar (4500 psi) Ports 2 and 3 pressurized 269 bar (3900 psi) Port 4 pressurized Control pressure at maximum control current: 14 bar (203 psi) TS90-G34A 20 bar (290 psi) TS90-G34B 30 bar (435 psi) TS90-G34C Flow Ratings Flow rating: 38 lpm (10 gpm) Maximum internal leakage: 0.40 lpm (0.11 gpm) TS90-G34A (de-energized) at: inlet 15 bar (210 psi) 0.55 lpm (0.15 gpm) TS90-G34B (de-energized) at: inlet 21 bar (305 psi) 0.60 lpm (0.16 gpm) TS90-G34C (de-energized) at: inlet 31 bar (450 psi) Hysteresis per cent: 4 % Other Ratings Cycle life: 10 million cycles Environmental rating: Ip69k Corrosion protection: 960 hour salt spray per ASTM b117 Temperature Ratings Operating fluid temperature: -40 to 149 °C (-40 to 300 °F) With HNBR seals -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals Storage temperature: -40 to 70 °C (-40 to 158 °F) Ambient temperature: -40 to 120 °C (-40 to 248 °F) |
| Operating Parameters: | Fluids:
Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt Maximum operating contamination level: TBD per ISO 4406 |
| Electrical Parameters: | Maximum control current:
1.08 A Coil 10 V 0.88 A Coil 12 V 0.74 A Coil 14 V 0.54 A Coil 20 V 0.44 A Coil 24 V 0.37 A Coil 28 V Dither PWM frequency: 150 Hz Coil resistance: 4.83 ohm 10 V coil 7.28 ohm 12 V coil 10.05 ohm 14 V coil 18.35 ohm 20 V coil 29.54 ohm 24 V coil 40.36 ohm 28 V coil Valve inductance: 58 mH Coil 10 V 88 mH Coil 12 V 127 mH Coil 14 V 235 mH Coil 20 V 357 mH Coil 24 V 537 mH Coil 28 V |
| Performance: |          |
| Installation Specifications: | Cavity:
VC-G025 Standard configuration Drop-in cavities Installation type: Flange mounted Orientation restriction: None Mounting screw torque: 3 to 4 N-m (2.2 to 3.0 ft-lb) Note: For retro-fitting into older drop-in cavities and other mounting options, see "Mounting-options-for-G3-valves" technical reference Mounting options for G3 Valves |
| Order Code: | POSITION CODE DESCRIPTION TS90-G34DG-H-J-KL-U D Max Regulated Pressure D A 14 bar (203 psi) D B 20 bar (290 psi) D C 30 bar (435 psi) G Screen G BLANK NONE G S 60 Mesh Screen H Line Body H 0 No Body H 6T Aluminum SAE 6 J Seal J G HBNR (Hydrogenated Nitrile Butadiene Rubber) J V Fluorocarbon J P Polyurethane K Coil Voltage K 10 10 VDC K 12 12 VDC K 14 14 VDC K 20 20 VDC K 24 24 VDC K 28 28 VDC L Coil Termination L EJ E-Coil, AMP Jr. L ER E-Coil, Deutsch L EY2A E-Coil, Metri-Pack 150.2 U Coil Termination U BLANK None U G Standard Single Valve Plate U T Retro-Fit Plate |
Related Products
06008D2110
$219.00 USD
0601061N10
$699.00 USD
0601061S10
$1,049.00 USD
0601061V10
$2,499.00 USD
0601063T13
$579.00 USD
