TS38-20BM-0-N-00 CARTRIDGE ASSEMBLY

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS38-20BM-0-N-00 (5122801) is a direct-acting, single-stage, poppet-type proportional pressure-relieving valve. This model regulates pressure in proportion to the input electrical current, effectively blocking flow from port 1 to port 2 until the pressure at port 1 offsets the solenoid force. In the absence of electrical current, the valve allows free flow between these ports. The TS38-20BM-0-N-00 features an industry-standard cavity and an optional manual override for added versatility. It has a pressure rating of up to 248.2 bar (3600 psi), proof pressure of 268.9 bar (3900 psi), and burst pressure reaching 751.5 bar (10900 psi). The adjustable pressure range varies from 0 to 206.8 bar (3000 psi), depending on specific configurations. The valve supports a flow rating of 11.4 lpm (3 gpm) when de-energized and maintains a maximum internal leakage of only 1 ml/min at 3000 psi between ports 2 and 1. It operates efficiently across a wide temperature range with different seal options: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. Storage and ambient temperatures are both rated between -40 to 70 \u00b0C. Corrosion resistance is assured with a salt spray endurance of up to 960 hours per ASTM B117 standards. The valve is compatible with mineral-based or synthetic hydraulic fluids that possess lubricating properties within a viscosity range of 7.4 to 420 cSt, maintaining optimal performance under ISO cleanliness code level of up to ISO4406:18/16/13. Installation requires VC08-2 cavity specifications, supporting installation torques for both cartridge and coil nut ranging from approximately 25.8 N-m for cartridges and up to about 6.8 N-m for coil nuts, respectively.