***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS58-20-50-0-N-00 (5122736N) is a direct-acting, poppet-type, proportional pressure relieving valve designed for precise pressure regulation. This valve operates by blocking flow from port 1 to port 2 until the pressure at port 1 reaches a sufficient level to open the valve, allowing proportional pressure relief based on input electrical current. In the absence of current, it permits free flow between ports. The TS58-20X can be equipped with either 12 or 24 volt coils and offers optional waterproof E-Coils rated up to IP69K for enhanced durability in harsh environments. The valve features an adjustable pressure range of 0 to 344.7 bar (0 to 5000 psi), with factory adjustments available between 275.8 to 344.7 bar in increments of 6.9 bar. It has a maximum flow rating of 6.8 lpm and maintains internal leakage below 4.5 ml/min at up to 80% of its maximum setting, ensuring efficient operation with minimal energy loss. Constructed for robustness, it withstands proof pressures up to 448.2 bar at port 1 and burst pressures reaching as high as 944.6 bar, ensuring reliability under demanding conditions. The TS58-20X is also corrosion-resistant, enduring up to 960 hours of salt spray per ASTM B117 standards. Temperature resilience is another key feature, accommodating operating fluid temperatures from -40\u00b0C to +100\u00b0C with buna N seals and extending further with alternative seal options like fluorocarbon and polyurethane seals for different temperature ranges. Designed for easy integration into systems using mineral-based or synthetic fluids with lubricating properties, the valve supports a fluid viscosity range from 7.4 to 420 cSt and adheres to a maximum contamination level of ISO cleanliness code of 18/16/13 per ISO4406 standards. This versatile component fits into industry-common VC08-2 cavities and requires specific installation torques for both cartridge (32.5 to 35.3 N-m) and coil nut (5.4 to 6.8 N-m). Optional accessories include various seal kits and housing options compatible with the TS58-20X model.