TS38-20A-0-N-24DG PRESSURE CONTROL

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS38-20A-0-N-24DG (Material Number: 5122312) is a direct-acting, single-stage, poppet-type proportional pressure-relieving valve. It is designed to regulate pressure proportionally to the input electrical current. The valve blocks flow from port 1 to port 2 until the pressure at port 1 offsets the solenoid force induced electrically. Without electrical current, it allows free flow between these ports. This valve features an industry-common cavity and has a manual override option for added control. It is rated for a maximum pressure of 248.2 bar (3600 psi), with proof and burst pressures of 268.9 bar (3900 psi) and 751.5 bar (10900 psi), respectively. The adjustable pressure range varies from 0 to 206.8 bar (3000 psi), depending on specific configurations. In terms of flow capabilities, it can handle up to 11.4 liters per minute (3 gallons per minute) when coil de-energized and maintains a maximum internal leakage rate of just 1 ml/min at 3000 psi from port 2 to port 1. The valve operates efficiently across various temperature ranges depending on the seal material used: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. This product also boasts robust corrosion protection, enduring up to 960 hours in salt spray conditions as per ASTM B117 standards, making it suitable for harsh environments. It accommodates fluids within a viscosity range of 7.4 to 420 cSt and requires a maximum operating contamination level of ISO code 18/16/13 per ISO standard ISO4406:1999 for optimal performance. Installation specifications include a VC08-2 cavity type with torque requirements for cartridge installation ranging from 25.8 to 28.5 N-m and coil nut torque between 5.4 and 6.8 N-m, ensuring secure placement in hydraulic systems.