5111500

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PV16-23-0-N-00 (5111500) is a two-way, normally closed, pilot-operated, electro-proportional hydraulic cartridge valve designed for use with an external compensator or load-sensing pump control. When de-energized, it effectively blocks flow from port 1 to port 2. As current is applied to the solenoid, output flow from port 1 to port 2 increases proportionally. This valve operates optimally with a differential pressure of 7 to 11 bar (100 to 160 psi) across it and requires the external pressure compensator or pump control to account for both the valve operating differential and system losses at maximum required flow. The PV16-23-0-N-00 features a continuous-duty rated coil, hardened spool and cage for enhanced durability, efficient wet-armature construction, and voltage-interchangeable cartridges. It also boasts waterproof E-Coils rated up to IP69K and solenoid tubes with a 960-hour salt-spray rating. The valve meets NFPA specification T2.6.1 standards with a verification level of 90% and assurance of 99%. With a pressure rating of up to 241 bar (3500 psi) and burst pressure of 896 bar (13000 psi), it supports flow rates between 95 to 170 lpm (25 to 45 gpm). The maximum internal leakage is limited to 15 ml/min at specific conditions. Operating fluid temperatures range from -40 to 100 \u00b0C (-40 to 212 \u00b0F) with Buna N seals and -26 to 204 \u00b0C (-15 to 400 \u00b0F) with fluorocarbon seals. It is compatible with mineral-based or synthetic hydraulic fluids possessing lubricating properties within a viscosity range of 7.4 to 420 cSt and supports an operating contamination level of up to ISO code level of 20/18/14 per ISO standard ISO4406:1999.