SF20-23-0-N-12ER SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SF20-23-0-N-12ER (5074015) is a solenoid-operated, 2-way, normally open, poppet-type screw-in hydraulic cartridge valve designed for load holding or blocking applications requiring low internal leakage at high pressures. When de-energized, the poppet lifts to allow flow from port 2 to port 1 and vice versa. Upon energizing, it acts as a check valve, blocking flow from port 2 to port 1 while permitting reverse flow. This valve features a continuous-duty rated coil and a hardened seat for extended life and minimized leakage. It offers optional coil voltages and terminations with voltage-interchangeable cartridges. The unitized molded coil design includes optional waterproof E-Coils rated up to IP69K and corrosion-resistant plating. It fits industry-common cavities and the VC20-2 cavity specifically. The SF20-23 operates under pressure ratings from 1.4 to 345 bar (20 to 5000 psi) with a flow rating of up to 303 lpm (80 gpm). Its maximum internal leakage is limited to 10 drops/min at 345 bar (5000 psi). The operating fluid temperature ranges from -40 to 100 \u00b0C (-40 to 212 \u00b0F) with buna N seals, -26 to 204 \u00b0C (-15 to 400 \u00b0F) with fluorocarbon seals, and -54 to 107 \u00b0C (-65 to 225 \u00b0F) with polyurethane seals. It supports mineral-based or synthetic hydraulic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. Installation specifications include a cartridge installation torque of between 88.4 and 102 N-m (65 to 75 ft-lb), maximum allowable torque of up to169.4 N-m (125 ft-lb), and coil nut torque between5.4 and6.8 N-m (4to5 ft-lb). The product weighs approximately1.48 lb(0.67 kg), with an internal wetted surface area of397 cm\u00b2(61.6 in\u00b2). Accessories include seal kits(SK20-2X-T)and various housing options for20-2w valve bodies alongside08 size DandE coils available for use with this versatile hydraulic solution.