SV16-20Y-16T-N-24DL SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-20Y-16T-N-24DL (Material Number: 5069270) is a robust solenoid-operated, 2-port, normally closed, poppet-type hydraulic cartridge valve. It is designed to operate as a load-holding or blocking valve in systems where low internal leakage is critical. When de-energized, this valve acts as a check valve, permitting flow from port 1 to port 2 while preventing reverse flow. Upon energization, the poppet lifts to allow flow from port 2 to port 1, significantly restricting the flow from port 1 to port 2. Key features include a continuous-duty rated coil and a hardened seat for enhanced durability and minimal leakage. The valve supports various coil voltages and terminations and benefits from an efficient wet-armature construction with interchangeable voltage cartridges. It also offers optional manual override and waterproof E-Coils rated up to IP69K. The SV16-20Y-16T-N-24DL can withstand pressures up to 241 bar (3500 psi), with proof pressure at 344 bar (5000 psi) and burst pressure reaching 779 bar (11300 psi). It boasts a flow rating of up to 227.4 lpm (60 gpm) based on a pressure drop of 34.4 bar (500 psi). The maximum internal leakage is limited to five drops per minute at rated pressure, ensuring efficient operation. This valve operates effectively across a wide temperature range: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. It also offers excellent corrosion protection withstanding up to 960 hours of salt spray per ASTM B117 standards. Installation specifications include compatibility with VC16-2 cavities and installation torque ranging from 62.4 to 73.2 N-m.