SV16-20M-0-N-12DG W/ 7004596 NUT

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-20M-0-N-12DG (5069040) is a solenoid-operated, 2-port, normally closed, poppet-type screw-in hydraulic cartridge valve. It is specifically designed to function as a load-holding or blocking valve in applications that require low internal leakage. When de-energized, this valve operates as a check valve, allowing flow from port 1 to port 2 while preventing reverse flow. When energized, the poppet lifts to allow flow from port 2 to port 1, with flow from port 1 to port 2 being significantly restricted. This valve features a continuous-duty rated coil and a hardened seat for durability and minimal leakage. It offers optional coil voltages and terminations along with efficient wet-armature construction and voltage-interchangeable cartridges. The unitized, molded coil design includes a manual override option and an optional waterproof E-Coil rated up to IP69K. Pressure ratings include a maximum of 241 bar (3500 psi), proof pressure at 344 bar (5000 psi), and burst pressure at 779 bar (11300 psi). It supports a flow rating of up to 227.4 lpm (60 gpm) based on a pressure drop of 34.4 bar (500 psi). Internal leakage is limited to five drops per minute at rated pressure. The operating fluid temperature ranges from -40\u00b0C to 100\u00b0C with Buna N seals, -26\u00b0C to 204\u00b0C with fluorocarbon seals, and -54\u00b0C to 107\u00b0C with polyurethane seals. The corrosion protection withstands up to 960 hours of salt spray per ASTM B117 standards. Suitable for use with mineral-based or synthetic hydraulic fluids possessing lubricating properties, it accommodates fluid viscosities ranging from 7.4 cSt to 420 cSt and maintains an operating contamination level of ISO code 20/18/14 per ISO 4406 standards.