SV16-22M-0-N-00 W/ 7004596 NUT

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-22M-0-N-00 (Material Number: 5069007) is a solenoid-operated, 2-port, normally closed, poppet-type hydraulic cartridge valve. This component is engineered to function as a load-holding or blocking valve in scenarios that demand minimal internal leakage. When in its de-energized state, the SV16-22 operates as a check valve, facilitating fluid flow from port 1 to port 2 while preventing flow in the reverse direction. Upon energization, the poppet mechanism lifts to allow bidirectional flow between ports 1 and 2. The valve features a continuous-duty rated coil and a hardened seat for durability and reduced leakage. It offers flexibility with optional coil voltages and terminations, along with an efficient wet-armature construction. The cartridges are designed for voltage interchangeability, complemented by a unitized, molded coil design and an optional manual override feature. Additionally, waterproof E-Coils are available with ratings up to IP69K for enhanced protection in harsh environments. The SV16-22M-0-N-00 can handle pressure ratings of up to 241 bar (3500 psi) and exhibits maximum internal leakage of just 3 drops per minute at this pressure level. Operating fluid temperature ranges vary based on seal material: -40 to 120 \u00b0C (-40 to 250 \u00b0F) with buna-n seals; -30 to 205 \u00b0C (-20 to 400 \u00b0F) with fluorocarbon seals; and -50 to 80 \u00b0C (-60 to 175 \u00b0F) with polyurethane seals. Constructed from steel with hardened work surfaces and zinc-plated exposed surfaces, this valve fits into industry-common VC16-2 cavities. Seal kits and housings for installation are available alongside compatible coils in sizes D and E for optimal integration into hydraulic systems requiring reliable load-holding capabilities.