SP16-20-12T-N-12DR SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SP16-20-12T-N-12DR (5062122) is a solenoid-operated, 2-port, normally closed, poppet-type proportional hydraulic cartridge valve designed for low leakage blocking and load-holding applications. When de-energized, it functions as a check valve allowing flow from port 1 to 2 while blocking the reverse flow. Upon energization, the poppet lifts to open the flow path from port 2 to 1, severely restricting flow in the opposite direction. This valve features a continuous-duty rated coil and efficient wet-armature construction, with optional manual override and waterproof E-Coils rated up to IP69K. It fits an industry-common cavity VC16-2 and can handle a pressure rating of up to 250 bar (3625 psi), proof pressure of 344 bar (5000 psi), and burst pressure of 779 bar (11300 psi). The SP16-20 offers a flow rating of up to 227.4 lpm (60 gpm) with a maximum internal leakage of just 5 drops per minute at rated pressure. Its operating fluid temperature ranges vary based on seal material: -40 to 100 \u00b0C with buna N seals, -35 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. It also boasts corrosion protection tested for up to 960 hours in salt spray per ASTM B117 standards. The valve is compatible with mineral-based or synthetic hydraulic fluids having lubricating properties within a viscosity range of 7.4 to 420 cSt and can operate in environments with contamination levels up to ISO code 20/18/14. With an inductance of 166 mH and maximum control current of 1.2 A for D-coil at 12 Vdc, this valve provides reliable performance in demanding applications requiring precise control over fluid dynamics.