SV16-23-16T-N-12DG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-23-16T-N-12DG (5061981) is a solenoid-operated, 2-way, normally open, poppet-type hydraulic cartridge valve designed for load holding or blocking applications that require minimal internal leakage. When de-energized, the poppet lifts to facilitate flow from port 2 to port 1, with reverse flow also permitted. Energizing the solenoid transforms the valve into a check valve, allowing flow from port 1 to port 2 while blocking reverse flow after overcoming a solenoid force of 50-150 psi (3.4 to 10.3 bar). This valve features a continuous-duty rated coil and a hardened seat for durability and low leakage. It offers optional coil voltages and terminations and incorporates an efficient wet-armature construction with voltage-interchangeable cartridges. The unitized, molded coil design includes a manual override option and optional waterproof E-Coils rated up to IP69K. The valve fits industry-common VC16-2 cavities and requires an installation torque of 62.4 to 73.2 N-m (46 to 54 ft-lb), with coil nut torque set between 6.8 to 9.5 N-m (5 to 7 ft-lb). It can operate at pressures up to 207 bar (3000 psi) with maximum internal leakage capped at three drops per minute at full pressure. The unit's operating fluid temperature ranges from -40\u00b0C to 120\u00b0C (-40\u00b0F to 250\u00b0F) with Buna N seals, or -30\u00b0C to 205\u00b0C (-20\u00b0F to 400\u00b0F) with fluorocarbon seals. Constructed from steel with hardened work surfaces and zinc-plated exposed surfaces for enhanced durability, this valve is compatible with available housings for installation in various hydraulic systems.