SV16-21-16T-N-115AG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-21-16T-N-115AG (5061973) is a solenoid-operated, 2-way, normally open, poppet-type screw-in hydraulic cartridge valve. This versatile valve is designed to serve as a load-holding or blocking valve in applications that require low internal leakage. When de-energized, the poppet lifts to open the flow path from port 2 to port 1 while severely restricting flow from port 1 to port 2. Upon energizing, the flow path from port 2 to port 1 is closed, allowing the valve to act as a check valve and enabling flow from port 1 to port 2 after overcoming a solenoid force of 50 to 100 psi (3.4 to 6.9 bar). The SV16-21 features a continuous-duty rated coil and a hardened seat for extended lifespan and minimized leakage. It offers optional coil voltages and terminations, efficient wet-armature construction, voltage interchangeable cartridges, and an optional manual override. The unitized molded coil design includes waterproof E-Coils rated up to IP69K for enhanced durability. In terms of performance, this valve can handle pressure ratings of up to 207 bar (3000 psi), with a static pressure rating of up to 250 bar (3650 psi) based on one million cycles. It has a proof pressure of up to 345 bar (5000 psi) and burst pressure reaching up to 965 bar (14000 psi). Maximum internal leakage is limited to three drops per minute at maximum operating pressure. Temperature ratings range from -40\u00b0C (-40\u00b0F) with Buna N seals or -26\u00b0C (-15\u00b0F) with Viton seals up to high temperatures suitable for varying operational environments. Suitable for mineral-based or synthetic hydraulic fluids with lubricating properties, it accommodates fluid viscosity ranges between 7.4 cSt and 420 cSt while maintaining contamination levels per ISO standards. Installation specifications include compatibility with VC16-2 cavities requiring specific torque settings for both cartridge installation and coil nut tightening without orientation restrictions.