SV16-21-12T-N-115AG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-21-12T-N-115AG (5061863) is a solenoid-operated, 2-way, normally open, poppet-type, screw-in hydraulic cartridge valve. This versatile component is engineered to function as a load-holding or blocking valve in applications that demand low internal leakage. When de-energized, the poppet lifts to open the flow path from port 2 to port 1 while severely restricting flow from port 1 to 2. When energized, it closes the port 2 to port 1 flow path and acts as a check valve, allowing flow from port 1 to port 2 after overcoming the solenoid force of 50 to 100 psi. This cartridge valve features a continuous-duty rated coil and a hardened seat for enhanced longevity and minimal leakage. It offers optional coil voltages and terminations and utilizes an efficient wet-armature construction. The design includes voltage interchangeable cartridges and an optional manual override. For robust applications, optional waterproof E-Coils are available with ratings up to IP69K. The SV16-21-12T-N-115AG operates under pressure ratings up to 207 bar (3000 psi), with static pressure up to 250 bar based on one million cycles, proof pressure at 345 bar, and burst pressure at an impressive 965 bar. The maximum internal leakage is limited to just three drops per minute at maximum pressure. Temperature ratings vary depending on seal material: -40\u00b0C to 100\u00b0C with Buna N seals and -26\u00b0C to 204\u00b0C with Viton seals. It accommodates mineral-based or synthetic hydraulic fluids within a viscosity range of 7.4 to 420 cSt and maintains optimal performance under contamination levels of ISO code 20/18/14. Installation specifications include compatibility with VC16-2 cavities requiring torque settings of 62.4 to 73.2 N-m for cartridge installation and coil nut torque between 6.8 and 9.5 N-m. The unit weighs approximately 0.37 kg (0.81 lb) with no orientation restrictions during installation.