SV16-21-12T-N-12DL SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-21-12T-N-12DL (5061812) is a solenoid-operated, 2-way, normally open, poppet-type hydraulic cartridge valve. It is designed to serve as a load-holding or blocking valve in applications where low internal leakage is crucial. When not energized, the poppet opens the flow path from port 2 to port 1, while restricting flow from port 1 to port 2. Upon energization, the flow path from port 2 to port 1 closes, allowing the valve to function as a check valve that permits flow from port 1 to port 2 after overcoming a solenoid force of 50 to 100 psi (3.4 to 6.9 bar). The valve's features include a continuous-duty rated coil and a hardened seat for enhanced longevity and minimal leakage. It offers optional coil voltages and terminations and employs efficient wet-armature construction with voltage-interchangeable cartridges. The unitized molded coil design includes a manual override option and optional waterproof E-Coils rated up to IP69K. The SV16-21 can handle pressure ratings up to 207 bar (3000 psi), with static pressure ratings of up to 250 bar (3650 psi) based on one million cycles. Its proof pressure reaches up to 345 bar (5000 psi), and burst pressure stands at an impressive 965 bar (14000 psi). With maximum internal leakage capped at three drops per minute at full pressure capacity, it operates effectively in temperatures ranging from -40\u00b0C to +204\u00b0C depending on seal material used (Buna N or Viton seals). This product fits VC16-2 cavities with specific torque requirements for installation and coil nut adjustments. It is compatible with mineral-based or synthetic hydraulic fluids within a viscosity range of 7.4 to 420 cSt, adhering to ISO contamination standards of up to 20/18/14 levels. Accessories available include seal kits and various housing options for versatile application needs.