SV16-21-0-N-115AG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-21-0-N-115AG (5061078) is a solenoid-operated, 2-way, normally open, poppet-type hydraulic cartridge valve. Engineered for applications requiring load-holding or blocking capabilities with low internal leakage, this valve is a versatile solution for controlling fluid flow. When de-energized, the poppet design allows fluid to flow from port 2 to port 1 while restricting flow in the opposite direction. Upon energization, it closes the flow path from port 2 to port 1 and acts as a check valve for flow from port 1 to port 2, needing a solenoid force of 50 to 100 psi (3.4 to 6.9 bar) to operate. Key features include a continuous-duty rated coil and a hardened seat ensuring long life and low leakage. The unit supports optional coil voltages and terminations with an efficient wet-armature construction and voltage-interchangeable cartridges. It offers additional options like a manual override and waterproof E-Coils rated up to IP69K in an industry-common cavity design. The SV16-21 can handle pressures up to 207 bar (3000 psi) with static pressure ratings of up to 250 bar (3650 psi) based on one million cycles. Its proof pressure is rated at 345 bar (5000 psi), while burst pressure can reach up to 965 bar (14000 psi). The maximum internal leakage is specified at three drops per minute at full pressure. This hydraulic valve operates effectively within a fluid temperature range of -40\u00b0C to 100\u00b0C (-40\u00b0F to 212\u00b0F) with Buna N seals or -26\u00b0C to 204\u00b0C (-15\u00b0F to 400\u00b0F) with Viton seals. It accommodates mineral-based or synthetic hydraulic fluids with viscosities between 7.4 and 420 cSt and maintains optimal performance under contamination levels of ISO code 20/18/14. The installation requires no orientation restrictions, fitting within VC16-2 cavities using specific torque settings for secure assembly.