SV16-22-16T-N-12DL SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-22-16T-N-12DL (5060913) is a solenoid-operated, 2-port, normally closed, poppet-type hydraulic cartridge valve. This valve is engineered to function as a load-holding or blocking valve in applications that require low internal leakage. When in its de-energized state, the SV16-22 operates as a check valve, permitting flow from port 1 to port 2 while preventing reverse flow from port 2 to port 1. Upon energization, the poppet lifts to allow flow from port 2 to port 1 and also maintains the flow from port 1 to port 2. It features a continuous-duty rated coil and a hardened seat for extended life and minimal leakage. The unit is designed with efficient wet-armature construction and offers interchangeable voltage cartridges along with optional coil voltages and terminations. The molded coil design is unitized for durability, and an optional manual override provides additional control flexibility. For enhanced protection in harsh environments, optional waterproof E-Coils are available with ratings up to IP69K. The valve fits industry-common cavities such as VC16-2 and can handle pressure ratings up to 241 bar (3500 psi). Flow ratings should be referenced from the performance chart provided by Hydraforce. Maximum internal leakage is limited to three drops per minute at full pressure capacity. Temperature operating ranges vary based on seal material: -40 to 120 \u00b0C with buna-n seals, -30 to 205 \u00b0C with fluorocarbon seals, and -50 to 80 \u00b0C with polyurethane seals. Constructed of steel with hardened work surfaces and zinc-plated exposed surfaces for corrosion resistance, this valve offers robust performance in demanding hydraulic applications.