SV16-20-12T-N-115AG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-20-12T-N-115AG (5060880) is a solenoid-operated, 2-port, normally closed, poppet-type screw-in hydraulic cartridge valve. This valve is specifically designed to serve as a load-holding or blocking valve in applications that require low internal leakage. When de-energized, it functions as a check valve allowing flow from port 1 to port 2 while blocking reverse flow. Energizing the valve lifts the poppet to open the flow path from port 2 to port 1, significantly restricting flow in the opposite direction. The SV16-20-12T-N-115AG features a continuous-duty rated coil and a hardened seat for durability and minimal leakage. It offers optional coil voltages and terminations with an efficient wet-armature construction and voltage interchangeable cartridges. The unitized molded coil design includes a manual override option and optional waterproof E-Coils rated up to IP69K, fitting into an industry-common cavity. This hydraulic cartridge valve is rated for pressures up to 241 bar (3500 psi), with proof pressure at 344 bar (5000 psi) and burst pressure at 779 bar (11300 psi). It supports a flow rating of up to 227.4 lpm (60 gpm) based on a pressure drop of 34.4 bar (500 psi). Maximum internal leakage is limited to five drops per minute at rated pressure, with hysteresis percentages varying based on current levels. Operating temperature ranges differ according to seal material: -40 to 100 \u00b0C (-40 to 212 \u00b0F) with Buna N seals, -26 to 204 \u00b0C (-15 to 400 \u00b0F) with fluorocarbon seals, and -54 to 107 \u00b0C (-65 to 225 \u00b0F) with polyurethane seals. The valve can handle fluid viscosities from 7.4 cSt up to 420 cSt and maintains corrosion protection for up to 960 hours of salt spray per ASTM B117 standards.