SV16-20-12T-N-115AP SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-20-12T-N-115AP (5060875) is a solenoid-operated, 2-port, normally closed, poppet-type hydraulic cartridge valve. It is specifically designed to function as a load-holding or blocking valve in applications that require low internal leakage. When not energized, the valve acts as a check valve, allowing flow from port 1 to port 2 while blocking flow in the reverse direction. When energized, the poppet opens the flow path from port 2 to port 1 but restricts flow from port 1 to port 2. The valve features a continuous-duty rated coil and a hardened seat for long life and minimal leakage. It offers optional coil voltages and terminations and utilizes an efficient wet-armature construction with voltage-interchangeable cartridges. The design includes a unitized molded coil and an optional manual override. Waterproof E-Coils rated up to IP69K are available for enhanced durability in harsh environments. The SV16-20-12T-N-115AP has pressure ratings of up to 241 bar (3500 psi) with proof pressure at 344 bar (5000 psi) and burst pressure at 779 bar (11300 psi). It supports a maximum flow rate of 227.4 lpm (60 gpm) based on a pressure drop of 34.4 bar (500 psi). The valve maintains maximum internal leakage of only five drops per minute at rated pressure and exhibits hysteresis percentages of up to 10% depending on current levels. Temperature ratings include operating fluid temperatures ranging from -40\u00b0C to +204\u00b0C, depending on seal material used, with storage and ambient temperatures between -40\u00b0C and +70\u00b0C. Designed for mineral-based or synthetic hydraulic fluids with lubricating properties, it accommodates fluid viscosities from 7.4 to 420 cSt and meets ISO contamination standards of up to level 20/18/14 per ISO 4406. The cartridge installation torque ranges from 62.4 to 73.2 N-m with no orientation restrictions during installation.