SV16-20-0-N-00 W/ 7004406 NUT SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV16-20-0-N-00 (5060005) is a solenoid-operated, 2-port, normally closed, poppet-type, screw-in hydraulic cartridge valve. It serves primarily as a load-holding or blocking valve in systems demanding minimal internal leakage. The valve operates as a check valve when de-energized, allowing fluid flow from one port to another while blocking the reverse flow. Upon energization, the poppet lifts to open the flow path between ports but restricts reverse flow significantly. This model features a continuous-duty rated coil and a hardened seat that ensures longevity and maintains low leakage levels. The SV16-20-0-N-00 is equipped with optional coil voltages and terminations, offering flexibility for different electrical requirements. Its efficient wet-armature construction and voltage interchangeable cartridges enhance its adaptability across various installations. The unitized, molded coil design contributes to its robustness, while an optional manual override provides additional control in managing flow paths manually. For environments requiring enhanced protection against moisture, there are waterproof E-Coils available that are rated up to IP67. This valve is designed to fit industry-common cavity configurations making it versatile for integration into existing hydraulic systems without extensive modifications. It supports various hydraulic fluids including mineral-based or synthetic types with lubricating properties within specific viscosity ranges ensuring reliable operation under diverse conditions. This model does not have orientation restrictions during installation which simplifies the setup process and expands its application potential across different operational orientations in machines and hydraulic circuits.