SV12-21K-16T-N-24DS SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5049380 (5049380) is a solenoid-operated, 2-way, normally open, poppet-type, screw-in hydraulic cartridge valve. This valve is designed to function as a load holding or blocking valve in various applications, particularly where low internal leakage is critical. In its default state when de-energized, the SV model allows hydraulic fluid to flow from port 1 to port 2 while significantly restricting flow in the reverse direction. Upon energization, the valve's poppet closes against its seat effectively blocking flow from port 2 to port 1 and acts as a check valve that permits flow from port 1 to port 2 after overcoming the solenoid force. Key features of this model include a continuous-duty rated coil and a hardened seat that ensure durability and minimal leakage over extended periods. The efficient wet-armature construction enhances its performance while its cartridges are voltage interchangeable which adds flexibility across different systems. The unitized, molded coil design contributes to robustness and reliability of operation. Additionally, it includes options such as different coil voltages and terminations to accommodate varying requirements, and manual override capabilities for enhanced control. For environments requiring robust protection against water ingress, optional waterproof E-Coils rated up to IP69K are available. This model also boasts a cost-effective cavity design that makes it an economical choice for integrating into hydraulic systems without compromising on quality or performance.