SV12-21K-0-N-24EG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5049074 (5049074) is a solenoid-operated, 2-way, normally open, poppet-type, screw-in hydraulic cartridge valve. This valve is specifically engineered to function as a load-holding or blocking valve in various applications where low internal leakage is critical. The operational dynamics of the 5049074 are straightforward: when de-energized, it allows fluid flow from port 1 to port 2, while flow from port 2 to port 1 is significantly restricted. Upon energization, the valve’s poppet closes against its seat effectively blocking flow from port 1 to port 2. This action transforms the valve into a check valve allowing flow from port 2 to port 1 only after overcoming the solenoid force. Key features of this model include a continuous-duty rated coil and hardened seat which ensure durability and minimal leakage over the lifespan of the valve. It also offers optional coil voltages and terminations to accommodate different system requirements. The efficient wet-armature construction along with voltage interchangeable cartridges enhances its versatility and ease of use in various configurations. The unitized, molded coil design contributes to its robustness and reliability in demanding environments. Moreover, for enhanced operational flexibility, this model comes with a manual override option. For applications requiring rigorous environmental protection standards, optional waterproof E-Coils are available that are rated up to IP69K. Its cost-effective cavity design makes it an economical choice for a wide range of hydraulic systems needing dependable load holding or blocking capabilities without compromising on performance and efficiency.