SV10-20M-8T-N-230AP SOLENOID VALVE
Manufacturer: Hydraforce
Material #: 5029276
Model : SV10-20M-8T-N-230AP SOLENOID VALVE
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5029276 (5029276) is a solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve designed for precise control in hydraulic systems. This valve features a standard SV1020 and manual override MO options, making it suitable as a blocking or load-holding device for low flow circuits that require pull-only manual override for handles or cable linkage. In its default state when de-energized, the SV1020X model functions as a check valve allowing fluid flow from port 1 to port 2 while blocking the opposite direction. Once energized, the valve’s poppet lifts to permit flow from port 2 to port 1 while significantly restricting flow in the reverse direction.
This model boasts a continuous-duty rated coil and a hardened seat which ensures durability and minimal leakage over extended periods. It offers flexibility with optional coil voltages and terminations to accommodate different system requirements. The efficient wet-armature construction of the valve enhances its performance while interchangeable voltage cartridges add to its versatility. The unitized, molded coil design supports robust operation and longevity.
Additional features include an optional waterproof E-Coils rated up to IP69K, making it suitable for environments requiring stringent protection against dust and water ingress. The industry common cavity design facilitates easy installation and compatibility with existing systems. Moreover, there is an option for integrating a position sensor for feedback on valve status, enhancing control accuracy in complex applications.
$155.50 USD
Availability: Backordered
Ships from US
Qty:
Delivered as early as October 26, 2026
| Ratings: | Pressure Ratings Pressure rating: 207 bar (3000 psi) Proof pressure: 345 bar (5000 psi) (sv10-20) Burst pressure: 896 bar (13000 psi) (sv10-20) Flow Ratings Flow rating: See performance graph Maximum internal leakage: 3 drops/min At (sv10-20 and sv10-20m) 207 bar (3000 psi) 3 drops/min At (sv10-20j/y) 207 bar (3000 psi) Temperature Ratings Operating fluid temperature: -40 to 100 °C (-40 to 212 °F) With buna N seals -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals -54 to 107 °C (-65 to 225 °F) With polyurethane seals Storage temperature: -40 to 70 °C (-40 to 160 °F) Ambient temperature: -40 to 70 °C (-40 to 160 °F) Other Ratings Corrosion protection: 960 hr salt spray per ASTM b117 (gsv10-20x) |
| Operating Parameters: | Fluids:
Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt Maximum operating contamination level: 20/18/14 per ISO 4406 |
| Performance: |  |
| Installation Specifications: | Cavity:
VC10-2 10-size-2-way Cavities Cartridge installation torque: 32.5 to 35.3 N-m (24 to 26 ft-lb) Coil nut torque: 6.8 to 9.5 N-m (5 to 7 ft-lb) Orientation restriction: None |
| Order Code: |  |
| Optional Position Sensor: | Seal kit:
SK10-2X-T (x = N (x = n, V and P seal option) Seal kit installation instructions Housings: Available 10-2w valve bodies Coils: 10 size D coils 10 size E coils |
