SV10-20M-0-N-24AP W/ 7004596 NUT
Manufacturer: Hydraforce
Material #: 5029047
Model : SV10-20M-0-N-24AP W/ 7004596 NUT
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-20M-0-N-24AP (5029047) is a solenoid-operated, 2-way, normally closed, poppet-type hydraulic cartridge valve designed for use in low flow circuits. This valve serves as a blocking or load-holding device and features a manual override option that is suitable for applications requiring pull-only manual override with handles or cable linkage. When de-energized, the SV10-20M operates as a check valve allowing flow from port 1 to port 2 and blocking the reverse flow. Upon energization, the valve's poppet lifts to enable flow from port 2 to port 1 while significantly restricting the opposite flow direction.
This model is engineered with a continuous-duty rated coil and a hardened seat which ensures long life and minimal leakage. It offers various options for coil voltages and terminations alongside efficient wet-armature construction. The cartridges are interchangeable across different voltages which enhances flexibility in usage. The unitized, molded coil design contributes to its robustness, and it can be equipped with optional waterproof E-Coils rated up to IP69K for enhanced environmental resistance.
The SV10-20M-0-N-24AP operates within a fluid temperature range of -40°C to +100°C with Buna N seals, accommodating different operational environments. The valve is also compatible with mineral-based or synthetic hydraulic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt.
With its industry-standard cavity (VC102), this valve ensures straightforward installation across various applications without orientation restrictions. Its design includes options for position sensors enhancing its utility in automated systems where feedback on valve status is crucial. This model's construction supports pressure ratings up to 207 bar (3000 psi) with proof pressures up to 345 bar (5000 psi) and burst pressures reaching up to 896 bar (13000 psi), ensuring reliability and safety under high-pressure conditions.
$113.00 USD
Availability: Backordered
Ships from US
Qty:
Delivered as early as October 27, 2026
| Ratings: | Pressure Ratings Pressure rating: 207 bar (3000 psi) Proof pressure: 345 bar (5000 psi) (sv10-20) Burst pressure: 896 bar (13000 psi) (sv10-20) Flow Ratings Flow rating: See performance graph Maximum internal leakage: 3 drops/min At (sv10-20 and sv10-20m) 207 bar (3000 psi) 3 drops/min At (sv10-20j/y) 207 bar (3000 psi) Temperature Ratings Operating fluid temperature: -40 to 100 °C (-40 to 212 °F) With buna N seals -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals -54 to 107 °C (-65 to 225 °F) With polyurethane seals Storage temperature: -40 to 70 °C (-40 to 160 °F) Ambient temperature: -40 to 70 °C (-40 to 160 °F) Other Ratings Corrosion protection: 960 hr salt spray per ASTM b117 (gsv10-20x) |
| Operating Parameters: | Fluids:
Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt Maximum operating contamination level: 20/18/14 per ISO 4406 |
| Performance: |  |
| Installation Specifications: | Cavity:
VC10-2 10-size-2-way Cavities Cartridge installation torque: 32.5 to 35.3 N-m (24 to 26 ft-lb) Coil nut torque: 6.8 to 9.5 N-m (5 to 7 ft-lb) Orientation restriction: None |
| Order Code: |  |
| Optional Position Sensor: | Seal kit:
SK10-2X-T (x = N (x = n, V and P seal option) Seal kit installation instructions Housings: Available 10-2w valve bodies Coils: 10 size D coils 10 size E coils |
