SV10-23K-0-N-00 W/ 7004426 NUT

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-23K-0-N-00 (5029029) is a solenoid-operated, 2-way, piloted, poppet-type hydraulic cartridge valve, specifically designed for low leakage in load-holding applications. The valve operates in a normally open state allowing bidirectional flow from port 2 to port 1 when de-energized. Upon energization, the poppet closes to block flow from port 2 to port 1 while still allowing free reverse flow from port 1 to port 2 after overcoming the solenoid force, which requires between 50 to 150 psi (3.4 to 10.3 bar). This unit features a continuous-duty rated coil and a hardened seat ensuring long life and minimal leakage. Additional features include optional coil voltages and terminations, efficient wet-armature construction, voltage interchangeable cartridges, and a unitized molded coil design. It also offers manual override options and optional waterproof E-Coils rated up to IP69K. The SV10-23K-0-N-00 is compatible with industry-common cavity VC102 and can be used with various fluids including mineral-based or synthetic hydraulic fluids with lubricating properties. The valve supports a wide range of operating temperatures depending on the seal material: -40°C to +100°C with Buna N seals, -26°C to +204°C with fluorocarbon seals, and -54°C to +107°C with polyurethane seals. It is capable of handling pressures up to 207 bar (3000 psi) with proof pressure up to 344 bar (5000 psi) and burst pressure up to 779 bar (11300 psi). The maximum internal leakage is limited to three drops per minute at full pressure. This robust design ensures reliable performance in various hydraulic applications without orientation restrictions during installation.