SV10-20M-0-P-00 W/ 7004596 NUT
Manufacturer: Hydraforce
Material #: 5029013P
Model : SV10-20M-0-P-00 W/ 7004596 NUT
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5029013P (5029013P) is a solenoid-operated, 2-way, normally closed, poppet-type hydraulic cartridge valve designed for precise control in hydraulic systems. This valve features a standard SV1020 and manual override (MO) options, making it versatile for various low flow circuit applications. It functions primarily as a blocking or load-holding device and is equipped with pull-only manual override capabilities suitable for handles or cable linkage.
Operationally, the 5029013P acts as a check valve when de-energized, permitting fluid flow from port 1 to port 2 while preventing flow in the reverse direction. Upon energization, the valve's poppet lifts to allow flow from port 2 to port 1, while significantly restricting flow in the opposite direction. This dual functionality enhances its utility in hydraulic circuits requiring controlled flow and directionality.
The valve boasts several notable features including a continuous-duty rated coil and a hardened seat that ensures longevity and minimal leakage. Its efficient wet-armature construction alongside optional coil voltages and terminations adapt it to varied operational needs. The cartridges are voltage interchangeable which increases flexibility in usage. Additionally, its unitized, molded coil design contributes to its robustness.
Further enhancing its functionality are options like waterproof E-Coils rated up to IP69K for superior environmental resistance, an industry-common cavity that simplifies installation processes across various applications, and an optional position sensor for advanced monitoring of valve status. These attributes make the Hydraforce 5029013P an effective solution for specialized hydraulic system requirements where reliability and performance are critical.
$62.75 USD
Availability: Backordered
Ships from US Note: Sales tax, shipping, and applicable tariffs will be calculated at checkout.This product is not available. CLICK HERE to create a support ticket for us to locate your part or a suitable replacement
| Ratings: | Pressure Ratings Pressure rating: 207 bar (3000 psi) Proof pressure: 345 bar (5000 psi) (sv10-20) Burst pressure: 896 bar (13000 psi) (sv10-20) Flow Ratings Flow rating: See performance graph Maximum internal leakage: 3 drops/min At (sv10-20 and sv10-20m) 207 bar (3000 psi) 3 drops/min At (sv10-20j/y) 207 bar (3000 psi) Temperature Ratings Operating fluid temperature: -40 to 100 °C (-40 to 212 °F) With buna N seals -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals -54 to 107 °C (-65 to 225 °F) With polyurethane seals Storage temperature: -40 to 70 °C (-40 to 160 °F) Ambient temperature: -40 to 70 °C (-40 to 160 °F) Other Ratings Corrosion protection: 960 hr salt spray per ASTM b117 (gsv10-20x) |
| Operating Parameters: | Fluids:
Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt Maximum operating contamination level: 20/18/14 per ISO 4406 |
| Performance: |  |
| Installation Specifications: | Cavity:
VC10-2 10-size-2-way Cavities Cartridge installation torque: 32.5 to 35.3 N-m (24 to 26 ft-lb) Coil nut torque: 6.8 to 9.5 N-m (5 to 7 ft-lb) Orientation restriction: None |
| Order Code: |  |
| Optional Position Sensor: | Seal kit:
SK10-2X-T (x = N (x = n, V and P seal option) Seal kit installation instructions Housings: Available 10-2w valve bodies Coils: 10 size D coils 10 size E coils |
