SV10-33M-0-N-12DG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-33M-0-N-12DG (5026325) is a high-performance solenoid operated, 3-port, direct acting, spool-type, screw-in hydraulic cartridge valve designed for efficient control in hydraulic systems. This valve operates by allowing flow from port 3 to port 1 when de-energized, and shifting flow from port 1 to port 2 when energized, simultaneously blocking flow at port 3. It is specifically noted that under low flow conditions, using the inlet flow source at port 1 is not recommended. The SV10-33M-0-N-12DG boasts a continuous-duty rated coil and features a hardened precision spool and cage which ensures longevity and reliability in operation. The unit's wet-armature construction enhances its efficiency, while its voltage interchangeable cartridges add flexibility to system design. All ports on this valve can be fully pressurized which broadens its application range. Additional features include an optional manual override, various coil voltages and terminations for adaptability in different systems, and optional waterproof E-Coils rated up to IP69K for superior environmental protection. The valve fits an industry common cavity (VC08-2) which simplifies installation processes. Key specifications include a maximum pressure rating of 207 bar (3000 psi), proof pressure up to 350 bar (5075 psi), and a flow rating of up to 18.9 liters per minute (5 gpm). It accommodates operating fluid temperatures ranging from -40°C to +120°C with standard seals and -30°C to +205°C with fluorocarbon seals. Its robust construction involves steel with hardened work surfaces and zinc-plated exposed components ensuring durability against tough conditions. For installation ease, the cartridge requires an installation torque of between 32.5 to 35.3 Nm (24 to 26 ft-lb), while the coil nut torque ranges from 6.8 to 9.5 Nm (5 to 7 ft-lb). Optional accessories like seal kits and various housings further enhance its utility in diverse hydraulic applications.